Flexible, lightweight and tough ...this is a colorful extension of the FlexiBrass® line and combines the classic crisp definition of metal with all the advantages of thin, flexible acrylic. Available with or without adhesive.
White and light-colored plastics are typically unsuitable for diode laser fabrication.
Why Choose FlexiColor®Scroll for more information
Microsurfaced Impact Acrylic
High Gloss, Matte non-glare, Brushed, Patterned
24-1/8" x 48-3/4" // 613mm x 1238mm
23-1/2" x 49" // 597mm x 1245mm
.003" // 0.08mm
Interior Signage
Trophies, Awards, & Plaques
Saws
Drills
Shears
Laser Vector Cuts
Bevels
Heat Bendable
Screen Prints
Hot Stamps
Bonds
Permits Fine Engraving
FLEXIBRASS and FLEXICOLOR engraving material softens at about 200°F (62.329°C) sufficiently so that it can be bent as needed. It can be sawed, drilled and bonded, but not sheared.
The base and cap materials, as well as the foils, were tested for flammability by Underwriters Laboratories. The base and cap materials, as well as the foils, were tested for flammability by Underwriters Laboratories. The base and cap materials are rated 94 HB on the UL 94 test. The foil was judged as not contributing to the combustion of the base material.
Port Wine / White
602-6722-Ply.020"
Celestial Blue / White
602-5722-Ply.020"
Harbor Grey / Silver
602-3632-Ply.020"
Harbor Grey / White
602-3622-Ply.020"
Yellow / Black
602-7442-Ply.020"
Blue / White
602-5122-Ply.020"
White / Black
602-2042-Ply.020"
Black / White
602-4022-Ply.020"
Red / White
602-6022-Ply.020"
"Textures sheared and cut on the table saw fine. Engraves with ease. We use this material for control panel plates. I like the durability and scratch resistant surface."
-Scott Bigelow
Signs of our Times
