Main Specifications
Material:
Microsurfaced Impact Acrylic
Finish:
High Gloss, Matte non-glare, Brushed, Patterned
Sheet Size:
24-1/8" x 48-3/4" // 613mm x 1238mm
23-1/2" x 49" // 597mm x 1245mm
Engraving Depth:
.003" // 0.08mm
Attributes:
Usage:
Interior Signage
Trophies and Awards
Plaques
Capabilities:
Scores
Saws
Drills
Shears
Laser Vector Cuts
Bevels
Heat Bendable
Screen Prints
Hot Stamps
Permits Fine Engraving
Thermal Prints
UV Printable
Physical Properties
IZOD Impact Strength
Tensile Strength
Flexural Strength
Specific Gravity
Rockwell Hardness
Deflection Temperature
Coefficient of Thermal Expansion
Vicat Softening Point
Additional Information
FLEXIBRASS and FLEXICOLOR engraving material softens at about 200°F (62.329°C) sufficiently so that it can be bent as needed. It can be sawed, drilled and bonded, but not sheared.
The base and cap materials, as well as the foils, were tested for flammability by Underwriters Laboratories. The base and cap materials, as well as the foils, were tested for flammability by Underwriters Laboratories. The base and cap materials are rated 94 HB on the UL 94 test. The foil was judged as not contributing to the combustion of the base material.
