Searching

View all results

Metro™ Screw Caps

Metro™ Screw Caps give you the perfect finishing touch to any sign mounting project.

Easy to assemble. Simply affix the Metro Screw Cap over an exposed screw for a seamless match to other Metro series products.

Features

  • Material (Black, Satin chrome, Chrome): brass
  • Material (Brushed silver): aluminum
  • Suitable for indoor applications
  • Installation method: drywall screws & anchors
  • 0.18" / 4.5 mm holes required in signage substrate
  • Sold in packs of 12
  • Assembly kit included

Metro™ screw caps

"XX" represents the code for selecting the finish

D = Diameter
C = Cap Thickness

Black
(02)

Solid brass, powder coated black finish

Satin Chrome
(03)

Solid brass, powder coated satin chrome finish

Chrome
(09)

Solid brass, bright chrome plated silver finish

Brushed Silver
(10)

Solid Aluminum, turned brush silver finish

SCFXX

D: 0.47" C: 0.20"
D: 12mm C: 5mm

SCF02

SCF03

SCF09

SCF10

Micro™ & Micro Steel™

Micro™ and Micro Steel™ decorative screw caps are used to mount sign materials flush to the wall quickly and easily. Micro screw caps feature a front mounting snap system for installation in places that are not easily accessible.

Features

  • Micro™ material: high quality electroplated brass
  • Micro Steel™ material: stainless steel
  • Indoor and outdoor weatherable
  • Installation methods: drywall screws & anchors
  • Recommended load per piece: 33 lbs / 15 kg
  • 0.18" / 4.5 mm holes required in signage substrate
  • Sold in packs of eight
  • Assembly kit included

Finish

Diameter

Cap Height

Item Code

Stainless Steel

0.59"
[15.0 mm]

0.20"
[5.0 mm]

FMI1500IX
(stainless steel)

Chrome

0.59"
[15.0 mm]

0.20"
[5.0 mm]

FMI1500CM
(chrome)

Satin Silver

0.59"
[15.0 mm]

0.20"
[5.0 mm]

FMI1500AR
(satin silver)

Satin Silver

1.18"
[30.0 mm]

0.28"
[7.0 mm]

FMI2500AR
(satin silver)

Dimensional™ Design Edge Gripper

Dimensional™ edge gripper mounts offer a sleek and clean mounting system for small and large jobs. You can easily attach the base and then rotate the decorative face cap up to 360º to mount vertically, horizontally or in any configuration that is required.

Features:

  • Material: anodized aluminum
  • Tamper resistant feature: locking set screw
  • Suitable for indoor applications
  • Installation method: drywall screws & anchors
  • No holes required in signage substrate
  • Substrate thickness: 0-0.43" / 0-11 mm
  • Sold in packs of four
  • Assembly kit included

Dimensional™ design edge gripper

"XX" represents the code for selecting the finish

D = Diameter
BL = Barrel Length

Black
(02)

Solid anodized aluminum, black finish

Matte Silver
(03)

Solid anodized aluminum, matte silver finish

Gold
(08)

Electro-plated aluminum, gold finish

Chrome
(09)

Electro-plated aluminum, chrome finish

DEGM1XX

D: 0.51" BL: 0.63"
D: 13mm BL: 16mm

DEGM102

DEGM103

DEGM108

DEGM109

Border™

The Border™ edge gripper mounting fixture gives signage the look of decorative stand-offs without having to drill holes through your glass or other expensive sign materials.

Features:

  • Material: high quality electroplated brass
  • Tamper resistant feature: locking set screw
  • Indoor and outdoor weatherable
  • Installation method: drywall screws & anchors
  • Recommended load per piece: 11 lbs / 5 kg
  • (Note: bottom hardware supports all the weight)
  • No holes required in signage substrate
  • Substrate thickness: 0-0.59" / 0-15 mm
  • Sold in packs of four
  • Assembly kit included

Finish

Diameter

Cap Height / Barrel Length

Item Code

0.98"
[25.0 mm]

0.16"
[4.0 mm]

0.98"
[25.0 mm]

FMI1500IX
(stainless steel)

Corner™

Corner™ mounting fixtures have a unique 90 degree angled notch that locks and holds your sign in place without having to drill holes through the sign material.

Features:

  • Material: high quality electroplated brass
  • Tamper resistant feature: locking set screw
  • Indoor and outdoor weatherable
  • Installation method: drywall screws & anchors
  • Recommended load per piece: 11 lbs / 5 kg
  • (Note: bottom hardware supports all the weight)
  • No holes required in signage substrate
  • Substrate thickness: 0-0.59" / 0-15 mm
  • Sold in packs of four
  • Assembly kit included

Finish

Diameter

Cap Height / Barrel Length

Item Code

0.98"
[25.0 mm]

0.16"
[4.0 mm]

0.98"
[25.0 mm]

FC2525AR
(satin silver)

Clamper™

The Clamper™ is a sleek, contemporary alternative to stand-offs and systems that normally require drilling holes in your signs.

Easy to mount, these holders permit a wide range of material thicknesses to be confidently secured. Mount singularly in pairs.

Features:

  • Material: high quality elctroplated brass
  • Tamper resistant feature: locking set screw
  • Indoor and outdoor weatherable
  • Installation method: drywall screws & anchors
  • Recommended load per piece: 11 lbs / 5 kg
  • (Note: bottom hardware supports all the weight)
  • No holes required in signage substrate
  • Substrate thickness: 0-0.59" / 0-15 mm
  • Sold in packs of four
  • Assembly kit included

Finish

Length

Item Code

2.36"
[60.0 mm]

FCL60
(silver matte)

3.94"
[100.0 mm]

FCL100
(silver matte)

7.87"
[200.0 mm]

FCL200
(silver matte)

11.81"
[300.0 mm]

FCL300
(silver matte)

15.75"
[400.0 mm]

FCL400
(silver matte)

23.62"
[600.0 mm]

FCL600
(silver matte)

35.43"
[900.0 mm]

FCL900
(silver matte)

Ghost™

Ghost™ is a hidden support system fastened or adhered to the back of the panels, signs and dimensional letters. Ghost achieves a clean look without drilling permanent holes through signage material.

Features:

  • Materials: brass nickel plated barrel, polycarbonate plate & snapping fastener
  • Tamper resistant feature: snapping lock fastener
  • Suitable for indoor applications
  • Installation methods: VHB tape, liquid glue, screws or silicone (only use VHB tape and glue for indoor applications)
  • Recommended load per piece: test each installation application individually
  • No holes required in signage substrate
  • Sold in packs of four
  • Assembly kit included
  • Replacement Ghost™ heads (synthetic piece) available 4/pack - FGK4618K

Finish

Diameter

Width / Barrel Length

Item Code

Clear / Chrome

0.63"
[16.0 mm]

1.77"
[45.0 mm]

0.71"
[18.0 mm]

FG4618K
(clear/chrome)

Klipser™

Klipser™ is a synthetic option which mounts the panel to the stand-off using a glue-click system, preventing the stand-off from being visible from the front. The Klipser quickly and inexpensively adds dimension to any project.

Features:

  • Material: frosted polycarbonate
  • Indoor weatherable
  • Installation metgods: provided glue-click system, VHB tape, liquid glue, or silicone
  • Recommended load per piece: test each installation application individually
  • No holes required in signage substrate
  • Sold in packs of ten
  • Assembly kit included

Finish

Diameter

Barrel Length

Item Code

Frosted
Polycarbonate

0.59"
[15.0 mm]

0.59"
[15.0 mm]

FKL1515
(frosted polycarbonate)

Frosted
Polycarbonate

0.79"
[20.0 mm]

0.79"
[20.0 mm]

FKL2020
(frosted polycarbonate)

Frosted
Polycarbonate

0.79"
[20.0 mm]

1.18"
[30.0 mm]

FKL2030
(frosted polycarbonate)

Panel Connector™

Panel Connector™ is an interlocking, slide-in rail system used for sign and picture mounting installation. Signs and materials can be snapped in place quickly and changed as needed.

Features:

  • Material: clear polycarbonate
  • Suitable for indoor applications
  • Installation methods: VHB tape, liquid glue, screws or silicone (only use VHB tape and glue for indoor applications)
  • Recommended load per piece: test each installation application individually
  • No holes required in signage substrate
  • Sold in four sets per pack
  • Assembly kit included

Finish

Height

Width

Item Code

Clear

2.36"
[60.0 mm]

1.18"
[30.0 mm]

FPC20100
(clear)

Pixfix™

Pixfix™ is a clever insert system that allows you to simply s witch out the panels anytime without c reating holes in the panels. Mount the Pixfix to the panel in the shop to save time on the job site later. The shallow design comes off of the wall less than 0.5" (10 mm).

Features:

  • Material: white polycarbonate
  • Indoor weatherable
  • Installation methods: Slow setting adhesive tape provided (48 hour set time) for panel side. Liquid glue, screws or silicone may be used for wall mount application.
  • Recommended load per piece: test each installation application individually
  • No holes required in signage substrate
  • Sold individually
  • Assembly kit included

Finish

Height

Length

Item Code

White

2.36"
[60.0 mm]

1.18"
[30.0 mm]

FPX100100SY
(white)