Click to return to Home Page
  

rotary engravable >>
ADA Alternative
ColorCast Acrylics
ColorHues
NEW ColorHues™ EFX
FlexiBrass & FlexiColor
Fusion Grafix
General Purpose/Utility-Grade Sheet
Heavy Weights
Lacquers
LaserGlow
LaserLIGHTS
LaserMark
LaserMax
Lucent
Mattes
Message Board
Metalgraph plus
NoMark Plus
NEW Reflexions
Reverse LaserMark
Safe-T-Mark
Satins
Slickers
Standard Metals
Textures
UltraGrave
Ultra-Mattes Front-Engravable
Ultra-Mattes Reverse-Engravable

 


 
Physical Properties:
     Front Engravable
Typical Values ASTM Method
IZOD Impact Strength
Notched at 73°F (22.78°C) 2.0 ft lbs/in D-256
Notched at 32°F (0°C) 1.6 ft lbs/in D-256
Unnotched at 73°F (22.78°C) 24.0 ft lbs/in D-256
Tensile Strength
To break 7,000 psi D-638
Elongation before break 28% D-638
Flexural Strength
Loan to stretch outer surface 5% 11,000 psi D-790
Specific Gravity 1.11 D-792
Rockwell Hardness R114, M45 D-785
Deflection Temperature
Temperature at which material deflects .010" (.254mm) at 264 psi 186°F (85.55°C) D-648
Coefficient of Thermal Expansion
Inch/inch/°F 5.0 x 10-5 D-696
Vicat Softening Point
Temperature for needle to penetrate 1mm (90°F/hr, 2.2 lbs) 217°F (102.78°C) D-1525
Physical Properties:
     Reverse Engravable
Typical Values ASTM Method
IZOD Impact Strength
Notched at 73°F (22.78°C) 5.0 ft lbs/in D-256
Notched at 32°F (0°C) 2.5 ft lbs/in D-256
Tensile Strength
To break 5,400 psi D-638
Elongation before break 70% D-638
Flexural Strength
Loan to stretch outer surface 5% 9,200 psi D-790
Specific Gravity 1.04 D-792
Rockwell Hardness R102 D-785
Deflection Temperature
Temperature at which material deflects .010" (.254mm) at 264 psi 175°F (79.44°C) D-648
Coefficient of Thermal Expansion
Inch/inch/°F 5.0 x 10-5 D-696
Vicat Softening Point
Temperature for needle to penetrate 1mm (90°F/hr, 2.2 lbs) 225°F (107.22°C) D-1525
 
 
NOTE: The above information is given in good faith, but no warranty, express or implied, is given.