Click to return to Home Page


laser engravable >>
NEW Rack Star™
ADA Alternative
ColorCast Acrylics
NEW ColorHues™ EFX
FlexiBrass & FlexiColor
Fusion Grafix
Hardwood Collection
Message Board
Metalgraph Plus
NEW Reflexions
Reverse LaserMark
The Naturals

rotary engravable >>

 Physical Properties
Typical Values ASTM Method
IZOD Impact Strength
Notched at 73°F (22.78°C) 1.10 ft lbs/in D-256
Tensile Strength
To break 5,500 psi D-638
Elongation before break 50% D-638
Flexural Strength
Load to stretch outer surface 5% 10,300 psi D-790
Specific Gravity 1.15 D-792
Rockwell Hardness M45 D-785
Deflection Temperature
Temperature at which material deflects .010" (.254mm) at 264 psi 175°F (79.44°C) D-648
Coefficient of Thermal Expansion
Inch/inch/°F 5.6 x 10-5 D-696
Vicat Softening Point
Temperature for needle to penetrate 1mm (90°F/hr, 2.2 lbs) 208°F (97.78°C) D-1525
Temperature for needle to penetrate 1mm (90°F/hr, 11.0 lbs) 187°F (86.11°C) D-1525
The Naturals softens at about 200°F (93.33°C) sufficiently so that it can be bent as needed. It can be sawed, drilled and bonded.
The base material was tested for flammability by Underwriters Laboratories. The material is rated 94 HB on the UL 94 test.
NOTE: The above information is given in good faith, but no warranty, express or implied, is given.