Click to return to Home Page
  

rotary engravable >>
ADA Alternative
ColorCast Acrylics
ColorHues
NEW ColorHues™ EFX
FlexiBrass & FlexiColor
Fusion Grafix
General Purpose/Utility-Grade Sheet
Heavy Weights
Lacquers
LaserGlow
LaserLIGHTS
LaserMark
LaserMax
Lucent
Mattes
Message Board
Metalgraph plus
NoMark Plus
NEW Reflexions
Reverse LaserMark
Safe-T-Mark
Satins
Slickers
Standard Metals
Textures
UltraGrave
Ultra-Mattes Front-Engravable
Ultra-Mattes Reverse-Engravable

 


 

ColorHues
 
 Physical Properties
Typical Values
Rupture by Pull
  760 kg/cm²
Flexural Strength (rupture by bend)
Loan to stretch outer surface 5% 1050kg/cm²
Specific Gravity 1.19-1.20
Rockwell Hardness M-100
Deflection/Distortion Temperature
Temperature at which material deflects .010" (.254mm) at 264 psi 100° C
Coefficient of Linear Expansion
Inch/inch/°F 6x10^5/cm/°C
Temperature Ranges
Highest temperature of continuous operation 80° C
Temperature ranges of thermoforming 140-180° C
Note: Natural variation in color is to be expected with this product

*Cast acrylics have thickness variations that may present difficulties in applications where thickness tolerance is important (i.e. fitting into extrusions, thermoforming applications where walls must maintain uniform thickness and assembly of complex structures). Remember to check gauge when non-contact engraving takes place and to periodically re-check focal lengths when laser engraving. In some cases, thickness variations may require the operator to make multiple passes during laser engraving.
NOTE: The above information is given in good faith, but no warranty, express or implied, is given.